13
200783_1
Maintenance
WARNING: Before any maintenance or whilst cleaning the exterior of the fireplace, the
unit should be disconnected from the power supply until it has cooled down.
Cleaning the Fire
Cleaning or polishing products are not recommended. Fingerprints or other marks on
the front glass panel can be removed by a piece of soft, damp, lint-free cloth with a
good quality household glass cleaner. The front glass panel should always be
completely dried with a clean, lint-free cloth or paper towel.
CAUTION:
Abrasive cleaners should not be used on the glass panel. Liquids should not
be sprayed directly onto any surface of the unit.
If the plug has to be changed because it is not suitable for your socket, or due to
damage, please follow the wiring instructions shown below.
The wires in the mains lead are coloured in accordance with the following code:
BROWN
:
LIVE (L)
BLUE
:
NEUTRAL (N)
GREEN / YELLOW
:
EARTH (E)
As the colours of the wires in the mains lead of this appliance may not correspond with
the coloured markings identifying the terminals in your plug, as follows
The BLUE wire is the NEUTRAL and must be connected to the terminal which is marked
with the letter N or coloured BLACK.
The BROWN wire is the LIVE and must be connected to the terminal that is marked with
the letter L or coloured RED.
The wire which is coloured GREEN / YELLOW must be connected to the terminal which
is marked E or the earth symbol or coloured GREEN or GREEN / YELLOW.
Always ensure that the cord grip is positioned and securely fastened.
WARNING
: THIS APPLIANCE MUST BE EARTHED.
If a 13A (BS1363) fused plug is used it must be fitted with a BS1362 13A fuse. If in doubt
consult a qualified electrician.
Electrical Connections - UK Plug Wiring Instruction
