200695 Issue 3
9
Maintenance
Warning: Before undertaking any maintenance or cleaning disconnect your appliance
from main supply and ensure it is completely cool. Only competent persons should
service / repair these appliances.
Changing Bulbs
Open the main door(s) as described in the “Assembly” section. Remove the decorative fuel effect
(logs or coals) then gently lift out the fuel bed (flat surface your fuel effect was resting on).
Unscrew and replace the damaged bulb(s) holding the body of the lamp holder if necessary to
prevent them from rotating. Replace the fuel bed and decorative fuel effect. The bulbs required
are
11W E14 SES Mini Spiral
available through all good DIY and electrical stockists.
Environment
The area around the fire should be kept free of any materials such as lint or house dust (i.e.
animal hair/ carpet fibres) that could be drawn into the internal workings of the appliance and
hence affect the performance. We recommend that you clean around the fan grille housing at
regular intervals. This can be done using a standard vacuum cleaner and suitable attachment.
Perspex
To prevent scratching of the front screen, we recommend only using a slightly damp dish cloth to
clean the screen.
Cast Iron Stove Body
A soft brush is normally sufficient to remove everyday dust and general debris from the cast
surfaces of the stove.
DO NOT
use any kind of chemical or abrasive cleaning products on your
stove as this will damage the paint finish.
Electric Supply Cable
Should the electric supply cable get damaged in any way, you will need to have it replaced by a
qualified electrician.
