Diagram B – how to connect
or
cable
A
– main power
cable
B
– load
OPERATION
•
While the power is on, the lamp will be flash three times and then off.
•
The LED will flash to display the preset times as following:
1 hour
flash one times
2 hours
flash two times
3 hours
flash three times
4 hours
flash four times
5 hours
flash five times
6 hours
flash six times
7 hours
flash seven times
8 hours
flash eight times
more than 8 hours
flash nine times
„dask to dawn” mode
rapidly flash about 3 seconds
•
You can adjust the
TIMER
knob to select your ON time.
NOTE: when you set the
TIMER
knob to the
DUSK TO DOWN
position, the sunset switch will change
into ordinary function, that it say the sunset has not timer function
•
Make the adjustment during day, when the daylight is more powerful. Turn the
LUX
, knob
anticlockwise to minimum - then turn slowly clockwise until the LED illuminated.
NOTE: The lamp, will switch on approx 60 seconds after the LED Has switched on
OTHER INFORMATIONS:
•
When lamp is on and the intensity of another light source reaches the light off
LUX value
, the lamp
will switch off after about 60 seconds, but the
TIMER
will stop counting. After the other light source
will be terminated, the lamp will switch again and the
TIMER
keeps counting until the set time
reached.
•
The electric
TIMER
will reset by the following status:
- power off over 2 seconds
- beginning from
TIMER
start counting, last over 24 hours (includes the time stop counting).
DANE TECHNICZNE
Zasilanie:
~230V/50Hz
Moc:
1 500 W
Zakres temperatury:
od -10*C do +50*C
Poziom LUX:
od 5 do 300 LUX
Klasa odporności:
IP 54
Klasa ochronności:
II
Zakres pracy timera
od 1 do 8 godzin, lub do świtu
Stan pracy
włączona / wyłączona czerwona dioda LED
Opóźnienie załączenia / wyłączenia
60 sek dla włącz / wyłącz
Wymiary (w mm)
118x69x40