BEMIS BioBodet HD-4000, Руководство пользователя, Страница: 7 / 9

12 13
13. After installing your
bidet attachment,
check to see if there is a
gap between the toilet
base and toilet seat.
14. If necessary, place
the bumpers on the
underside of your toilet
seat as indicated above.
If there are no immediate leaks, check again
in about 5-10 minutes and your HD-4000 is
ready for use!
If any leaks occur, check all rubber washers and
make sure all connections are tight and secure.
HOW
TO USE
For back wash, turn the control dial to the left
towards the “ “ position.
For front/feminine, turn the control dial to the
right towards the “ “ position.
The further the knob is turned, the higher the
water pressure will be. Adjust the control dial
to choose the comfortable pressure you want.
The control dial doesn’t reset automatically,
please turn it off manually.
INSTALLATION (CONT.)