BEMIS bioBidet DIB Special Edition, Руководство пользователя

Страница: 9 / 21

16 17
REMOTE CONTROL INSTALLATION
•
Remove the adhesive
protection to attach the
remote control bracket to
the wall or other surfaces.
• Turn remove over and open
the battery compartment.
Inset four “AAA” type
batteries (included) as
indicated inside battery
compartment and replace
battery cover. • Identify a location in the
bathroom for the remote
control that is visible and
reachable from the toilet and
mount remote using double
stick tape (included).
•
Clean the area thoroughly
before attaching the bracket.
1. Remove Adhesive 2. Clean Area
3. Batteries 4. Mount Remote (Optional)
5. Battery Life 6. Unplug If Unit Does
Not Work
•
When the batteries have
reached the end of service
life, all LEDs will blink.
Replace the batteries with
new AAA size (4pcs).
• CAUTION - Do not use old
and new batteries together.
This could cause damage or
failure of the remote control.
•
If the unit does not work
after replacing the batteries,
unplug and wait for 3
seconds. Plug in again.
•
After replacing the batteries,
ID of the unit will be
initialized as “00” and its
ID will be equalized ID of
the remote control that
reaches the unit first. This
ID assigning function will
be needed to prevent signal
interruption if more than 2
units are used at one place.
In case of using one unit only,
no setting is needed.