BEMIS bioBedet BB1000, Руководство пользователя

Страница: 9 / 19

16 17
•
Plug the power cord into
the outlet, and then the water
tank will be filled with water in
2 minutes.
• Check all the functions.
Cover the toilet using
the sheet of plastic wrap
on the unit to prevent the
washing water from being
sprayed out of the toilet.
Then check for all functions
described in this manual.
•
There are possibilities
of water coming out
that remains in the unit
while heating.
•
After installing your bidet
attachment, check to see if
there is a gap between the
toilet base and toilet seat.
• If necessary, place the bumpers
on the underside of your toilet
seat as indicated above.
TESTING & SEAT BUMPERS OPERATION
Adjust the water pressure and warm air
dryer temperature.
Adjust the oscillation function and nozzle
position (5 levels).
Adjust the water and seat temperature (4 levels).
Power Saving mode button.
When you sit on this product, please sit down on the central
position in order to activate the sensor.
After an extended wash, allow water to be reheated
for 3 minutes.
Preparation
•
Check for any water leaks
•
Plug the unit into the proper power source and the LED power light will
start flashing,
•
Wait until the LED power light stops flashing and becomes solid red.
•
The water tank will be filled after pushing a “Wash” button.
•
When the water tank is filled the buzzer “Beeps” continuously, after the
water tank is full the buzzer will end with “One Solid Beep.”