BEMIS A06303TWA 000, Инструкция по установке и эксплуатации

Страница: 7 / 16

7
9. While holding down the bidet attachment with one hand, pick up
the Clean Shield seat, align the bolts to the mounting holes and push the seat
downward through the slots in the circular mounting disks so the bolts enter
the seat mounting holes on the toilet. Pushing downward and holding the
seat in place, lightly handtighten the Snap 2 Secure nuts
10. Prior to final tightening, center the bidet attachment. Slide the bidet
attachment as far to the back of the bowl as possible. Align the circular
mounting disks so the angle of the slots are mirrored. (see diagrams 10A
and 10B) Confirm that the bidet attachment is centered by checking that the
hinge bases are on the same location on the bidet attachment (see diagram
10C)
*For best results, the attachment should be back as far as possible and the
slot angles should be mirror images.
10A 10B 10C