8
CHARGING
Before start using the
device, please make sure
the battery is charged. For
charging, please use the
provided magnet charging cable. The recommended power
adaptor current is 5V, 1A. It takes about 2 hours to fully charge
device. Please follow the steps below to the charge.
1.
Place the connector of the charging cable under the device so
that its pins contact the the device charging terminal.
2.
Magnetic connector will place it self in right position.
3.
Connect the charging cable to the power source using the USB
connector.
4.
Charging animation will display on the device screen. Note: if
the device was completely discharged then animation of
charging may appear after a few minutes.
INSTALLING APP FOR PHONE AND PAIR WITH DEVICE
Note: mobile phone must support Android 5.1 or IOs 8.4 or
above and Bluetooth 4.0 or above. The device is supported by
mobile application
“
FitCloudPro
”, in manual
called “APP” that
can be downloaded and installed from
Apple “
App store
”
or
“
Google Play Store
”
on your smartphone. While pairing, the
phone should be connected to the Internet. Make sure that the
smartphone is set to "Visible to all nearby Bluetooth devices"
when pairing. Pairing the device with the phone via APP:
1.
Activate Bluetooth on your phone
2.
Open the application and click "Mine", and then in "Add
Device" click
“SEARCH
".
3.
Click on the name of your device in the device list. If the
connection is s
uccessful, “Connected” appears next to device
name, and the app will synchronize data from the smart watch.
Bluetooth connection may disconnect in some circumstances,
the most common of them are: phone and device are too far
from each other(more than 10 meters), there are some walls
between them, there are some magnetic or radio interference in
