8
CHARGING
Before start using the device, please
make sure the battery is charged. For
charging, please use the provided
charging station. The recommended
power adaptor current is 5V, 1A. It takes
about 2 hours to fully charge device.
Please follow the steps below to the
charge.
1.
Open chargind station and place the
device inside so that its pins contact the
metal points in the device charging
terminal.
2.
Make sure that device is in right
position and clouse charging station. If
can not clouse charging station easyly that means that prabably
you put device wrong way or device did not placed well. Do not
try to cloouse charging station if device do not fit right.
3.
Connect the charging cable to the power source using the USB
connector.
4.
Charging animation will display on the device screen. Note: if
the device was completely discharged then animation of
charging may appear after a few minutes.
INSTALLING APP FOR PHONE AND PAIR WITH DEVICE
Note: mobile phone must support Android 5.1 or IOs 8.4 or
above and Bluetooth 4.0 or above. The device is supported by
mobile application
“
Da Fit
”, in manual called “APP” that can be
downloaded and installed from
Apple “
App store
”
or
“
Play Store
”
on your smartphone. While pairing, the phone
should be connected to the Internet. Make sure that the
smartphone is set to "Visible to all nearby Bluetooth devices"
when pairing. Pairing the device with the phone via APP:
1.
Activate Bluetooth on your phone
2.
Open the application and click "Add Device".