Bematech SB9015T, Руководство пользователя

Страница: 3 / 28

2
1 Introduction
Thank you for purchasing the SB9015T all-in-one true-flat touch POS terminal.
Bematech is committed to continuously improve product quality and provide better
after-sales service. In order to take full advantage of our devices, we strongly
recommend that you take the time to read this manual before diving into software
solution.
Note:
Information in this manual may change without prior notice.
1.1 Safety Information

Before plug in the product, please make sure the power you provide meets
the power requirements (such as voltage, frequency); Make sure the ground
terminal of the power outlet is working properly.

To avoid electric shocks, disconnect the power cord from the electrical outlet
before relocating the system.

Lightning may damage this product. During lightning storms, unplug the
network cable, power cable and any other connections.

Turn off power before connecting any devices (except USB devices) to the
terminal.

Do not attempt to open the chassis. You may be hurt by electric shock. For
service, call your place of purchase.

Do not spill liquid on the terminal. Do not place any objects into the
ventilation holes of this product. It may cause short-circuit of the internal
components and cause a fire or electric shock.

After the terminal is stored below temperature of 10 ° C, please place it in
room temperature (10-35 ° C) in the original packing for at least two hours to
allow the terminal to restore to room temperature before operation. This is
to avoid condensation that might cause electrical damage.

Keep the terminal clean, dry, and away from dust, moisture and direct
sunlight.