Quick Start Guide for LS9000 Kitchen Video Controller
6
HARDWARE INSTALLATION
Component Placement
The following is recommended when you plan the Logic Net setup:
Place the LS9000 so that you can use the mounting brackets located at the
bottom of the unit.
Place the LS9000 so that the RESET/POWER buttons are accessible.
Place the LS9000 so that the beeps from the speakers can be heard.
Place the LS9000 so that the LED indicator on the front panel can be seen.
Place the LS9000 above grill/counter level, out of the way of possible spills.
Mounting Instructions
Mounting brackets are provided to facilitate mounting the LS9000 to a wall, ceiling
or display monitor mounting arm. The installer should insure that the wall anchors
used with the mounting brackets have the capacity to support 4.3 kg (9.5 lb.). This
weight is determined by adding a safety margin weight to the weight of the unit. Wall
anchors with specified weight capacity are available commercially.
Connections
Make sure that all systems are powered off before making or removing any
connections to the LS9000 unit. Follow the steps below in connecting the devices:
1.
Connect the VGA cable of the display monitor to the LS9000.
2.
Connect the RS232 cable of serial devices to the LS9000 (if any).
3.
Connect the keyboard device to the LS9000.
4.
Connect the Ethernet cable from Ethernet hub or switch to the LS9000.
5.
Connect power to all peripheral devices and turn on power.
6.
Connect power adapter to the LS9000 and power cord to the power
adapter.
7.
Plug the power cord into AC power outlet.
8.
If necessary, reset the LS9000 by pressing the reset button or using the
power on/off button.