Technical Documentation
KSR-Z – Capacitor-Bank Protection Relay
Rev. 04
Page
11
/
36
Section 3: Usage and Main menu
The device provides 4 keys to the user to accept any inputs. The keys are numbered key 1... key 4
from left to right. The actual function of a certain key changes due to the actual context. The keys
function is indicated by small pictograms in the bottom line of the display.
After turning on the supply power, the KSR-Z automatically starts with displaying values of the
measurement menu. The key, which is labelled with capital letters „M“ can be used to switch to the
main menu.
In the main menu, one can choose between the following possibilities:
3. Main menu
3.1. measurement = display measured values
3.2. harmonics = display harmonics
3.3. setup = device setup sub-menu
3.4. device info = display device information
3.5.
reset alarms = reset all relays, configured with “manual reset”
3.6. fault recorder = displays all recorded alarms with time stamp and grid data's
Use the keys „
“ and „
“ to place the desired entry next to the tiny arrow („>“) on the left side. Press
the „
“ - key to activate the selected entry.
Whenever a capital “M” is used as key symbol in any sub-menu, pressing the key
will switch straight to the main menu.
!
