Step 2
Fitting the antenna.
Drill two or four holes as desired in
the mounting plate and fit the antenna
using the machine screws or self-tapping
screws. The antenna should preferably be
positioned vertically.
If it is difficult to mount the antenna
directly on the vehicle, the mounting
bracket supplied should make it possible
to find a suitable place for the antenna.
Remember the driving direction (arrow)
and to position the antenna vertically.
Step 3
Fixing the antenna cable.
Find an existing cable run and use the
tie-wraps to secure the antenna cable.
Avoid moving parts or parts that become
hot.
Use preferably one of the existing
openings in the bulkhead through which to
feed the cable to below the dashboard.
Step 4
Fitting the display.
There are three possibilities for fitting
the display:
a.
Below the dashboard or in a compart-
ment. The plastic holder and the tape
supplied will hold the display in place.
b.
In the dashboard using the dashboard
frame
9
Fitting the antenna.
Fitting the display.
ONCOMING
TRAFFIC
BEVESTIGINGSBEUGEL
REFLECTIE-
PLAAT
ONCOMING
TRAFFIC
BEVESTIGINGS
BEUGEL
