![background image](http://html1.mh-extra.com/html/beltronics/v940/v940_operating-instructions-manual_2730799009.webp)
To exit Tutorial Mode, press the
PWR
button and
your unit will be on and ready to receive signals.
Set and Forget Memory
Any time your unit is turned off or unplugged from the
cigarette lighter socket, all feature settings you have
selected are retained in the unit’s memory. Set and
Forget Memory eliminates the need to reset your
preferred feature settings each time your unit is
turned off and then back on.
Reset to Factory Settings
You can reset your unit to factory settings for Start-Up
mode, volume, DRK, AUD, CTY and General Selectable
Features. To reset, press and hold the
CTY
button until
the display shows
“
R
RE
ES
SE
ET
T
“ .
Two “beeps“ will sound and
your unit will cycle through the
N
NO
OR
RM
MA
AL
L
Start-Up
Mode.
DRK (Bright/Dim/Dark) Button
The
DRK
button allows selection of a bright, fully
adjustable dim or dark mode. Your unit is factory
preset to full bright display. To engage dim mode,
press and hold the
DRK
button. The display will
cycle through various levels of dim illumination.
Release the button at your chosen level. To engage
dark mode, press the
DRK
button a second time. A
single “beep” coupled with the brief illumination of
“
D
DA
AR
RK
K
”
on the display confirms your selection.
You’ll notice an
“
A
Ass
”
(AutoScan
™
),
“
H
H
”
(Highway
mode),
“
C
C xx
”
(City mode) or
“
C
CA
A
”
(City ALL) remains
dim to confirm your unit is receiving power. To
return to a full bright setting, press the
DRK
button
a third time; two “beeps” confirm this selection. Use of
the
DRK
button does not affect audio alerts.
Important—if you press the the DRK button and do not
receive audible confirmation, the audio level has been set
too low.
8
k
k
k
Содержание V940
Страница 31: ...Notes 30 ...
Страница 36: ......