12
Overview of Programming
13
Pilot HWY
Pilot H
Voice ON
Voice OFF
PwrOn STD
PwrOn FST
aMute ON
aMute OFF
City STD
City LoX
Bands DFT
Bands MOD
POP ON
or
OFF
(default is off)
SWS ON
or
OFF
(default is off)
TSR ON
or
OFF
(default is on)
Press the CHANGE button
to change your setting
within a category
* Full word: Highway or City
Letter: H or C
* Voice alerts on
Voice alerts off
* Standard power-on sequence
Fast power-on sequence
* AutoMute on
AutoMute off
* Standard City mode sensitivity
Low X band sensitivity in City Mode
* Factory default settings
Factory default settings modified
Turn bands “ON” or “OFF” by
pressing the VOLUME/MUTE button
Press the REVIEW button
to go from one category
to the next
PILOT
(Power-on indication)
VOICE
POWER-ON SEQUENCE
AUTOMUTE
CITY MODE SENSITIVITY
BANDS
*
Factory Default Settings
To reset your Pro100 to its original
factory settings, press and hold the
“CITY” and “BRT” buttons while
turning the power on. The Pro100’s
display will provide a
Reset
message, accompanied by an audible
alert, acknowledging the reset.
Details of Programming
Pilot (Power-on indication)
NOTE: When you are using the Dark mode,
the display will only show HD or CD
(Highway-Dark or City-Dark).
Pilot HWY
(Full description)
In this setting, your Pro100 will display
“Highway” or “City” as its power-on
indication. (factory default)
Pilot H
(Letter)
In this setting, your Pro100 will display “H”
for Highway and “C” for City.
Voice
Voice On
(Voice announcements on)
In this setting, all radar, laser, and SWS
messages (if programmed) will be
announced using a digital voice.
Voice Off
(Voice announcements off)
In this setting, only the distinct audio tone
will be heard when a radar, Laser, or SWS
message is detected.
Power-on Sequence
PwrOnSTD
(Standard)
In this setting, each time you turn on your
Pro100, it will display “Pro100,” “Laser,” “Ka-
band,” “K-band,” “X-band,” “Safety,” followed
by a brief X-band alert. (factory default)
If any bands have been changed from
the factory default settings, a double X-band
tone and corresponding message
(i.e. “SWS ON”), will alert you that one or
more bands have been changed.
PwrOnFST
(Fast power-on)
In this setting, your Pro100 will provide a
single X-band tone. If any bands have been
changed from the factory default settings,
a double X-band tone and corresponding
message (i.e. “SWS ON”), will alert you that
one or more bands have been changed.
AutoMute
aMute ON
(AutoMute on)
In this setting, your Pro100’s audio alerts
will initially be at the volume you set,
but after a few seconds, the Pro100 will
automatically reduce the volume level,
to keep you informed, but not annoyed.
(factory default)
aMuteOFF
(AutoMute off)
With AutoMute off, your Pro100’s audio
alerts will remain at the volume you set for
the duration of the radar encounter.
