![background image](http://html1.mh-extra.com/html/beltronics/e936cs/e936cs_operating-instructions-manual_2730763013.webp)
Note—the tip is in two pieces; be careful not to lose either piece
or the spring inside the holder. (See diagram on page
13
).
u nd e rsta nd i n g r ada r , l ase r a nd s ws
™
Three Radar Frequencies
Three microwave frequencies have been allocated by the
fcc
(Federal Communications Commission) and are used for
traffic Radar: X, K and Super Wideband Ka. Your
express 936
provides detection to ALL known Radar traffic devices.
Unlike Radar signals, which are highly reflective, Laser signals
have very poor reflective characteristics. Many of today’s
Laser detectors do not have the high sensitivity necessary to
detect Laser within a large “field of view”.
express 936
incorporate
bel’s
number one rated Laser detection. Twin
Laser ports detect energy far outside the main Laser beam—
including off-axis signals—providing the largest achievable
360
° “field of view”. The alerts provided by your unit are the
same whether signals are received from the front or rear.
Safety Warning System
®
(sws
™
)
—What is it?
The Radio Association Defending Airwave Rights, Inc.
(
r.a.d.a.r.
) conceived and developed the Safety Warning
System
®
. The concept behind this system is to warn motorists
of potential road hazards by employing Safety Warning System
®
transmitters in areas such as construction zones, accident
sites and detours. These
sws
™
transmitters operate within
the
24 gh
z
portion of the K band frequency, and broadcast
uniquely coded signals that are detected by your unit.
Total Tracking Laser
™
(ttl
™
)
12893 Bel Express 936 Manual 4/26/01 2:30 PM Page 13
Содержание E936CS
Страница 25: ......