Doc 0176160 rev. I
Page 13 of 19
Not subject to issue control when printed
Separate the module from the top housing. Note that the PB
cover is not glued to the top HSG
Gently push out PB cover from top HSG (from outside). When mounting the new
PB cover, make sure bottom part of PB cover is placed properly
Before mounting the new top
HSG to the new module, make
sure the transp covers are
mounted to the module
Push out mic cover from
top HSG
When mounting the new mic
cover, insert left side wing first
Gently push right side wing in place and slowly press the mic
cover in place. Be carefull not to damage any of the wings
Place bottom part of the module on the top HSG. Insert top part
of module until pin holes are aligned
Top HSG with hole to
push out the mic cover
Replacing Top HSG, Module, PB & Mic Cover
