Remote Control – part 2 (Functional Test)
1.
With the devices connected, check the buttons on
Remote Control.
p
(
)
Remote Control.
•
If the Remote Control is in stand by mode (Display not lid), pressing any button
will bring it to active mode, but will not perform the function of the button.
•
For the following tests move Remote Control approximately 150 cm away from
TRUE devices.
2.
Press Program button once.
•
TRUE devices will play
Preset2
sound.
•
Until communication between Remote Control and TRUE devices is complete,
the volume bar will be light blue
the volume bar will be light blue.
•
The display will show the preset name set entered into TRUE devices by the
SolusPro fitting SW.
•
Check that Remote Control changes the display to Preset 2.
Right side : finished
3.
Multi function button test:
•
The multi function button on the Remote Control is used for:
: turning volume up
: turning volume down
Right side : finished.
Left side: on-going.
+
Sound sample:
Pairing Complete
: turning volume down
: Selecting left side TRUE device only
: Selecting right side TRUE device only
_
<
>
Functional
Test
– Quick
Guide
|
Global
Technical
Operation
|
Page
7