Beltone CABR70, Руководство пользователя

Страница: 24 / 76

Placing the Auto-Phone magnet
Place the magnet on your telephone receiver as follows:
1. Clean the surface thoroughly. Use a
recommended cleaning agent.
2. Remove the foil from the
magnet.
3. Place the magnet on the
phone.
CAUTION:
•
If you experience frequent signal loss or noise during calls, move the Auto-Phone magnet to another
place on the telephone receiver.
•
Only use magnets supplied by Beltone.
How to use Auto-Phone
1. Lift the telephone to your ear.
2. When you hear a short melody, the phone program is active.
24 Using your hearing aids