www.belson.com
STEP #2: PLACE ANOTHER SIDE PANEL BESIDE THE PREVIOUS PANEL, SO THAT IT TOUCHES, AS
DISPLAYED IN THE DISAGRAM ABOVE. GENTLY TURN THE SIDE PANEL WITH THE RINGS INSTALLED
ONTO THE NEW SIDE PANEL. MAKING SURE THE HOLES LINE UP WITH THE PRE-DRILLED PILOT
HOLES IN THE PANEL. FASTEN USING ( 1 ) ONE 2-1/2” FLAT HEAD PHILLIPS SCREW PER HOLE.
REPEAT THIS STEP FOR THE REST OF THE SIDE PANELS.
#12 X 2-1/2” FLAT HEAD
PHILLIPS SCREW
