WOOD PICNIC TABLE DRILL PATTERN
RECOMMENDED LUMBER:
2” x 10” Nominal (1-1/2” thick by 9-1/4” wide).
1.-Make sure all 5 boards are of consistent length, roughly 6’ or 8’ (
two 6’ and three 8’ for ADA models
).
2.-Lay all 5 boards on a flat surface that will not damage the wood with the best side down.
3.-Draw centered
Vertical
and
Horizontal Lines,
then two
Lateral Lines
29-1/2” from
Vertical
Center Line
on all boards (this will be your reference for hole locations).
4.-Drill 3/8” diameter holes in boards per drill pattern and notes indicated above.
5.-If desired, cut miters as per top of page lumber kit details and paint or seal before assembly.
6’ OR 8’
59”
VERTICAL CENTER LINE
29-1/2”
29-1/2”
DRILL
DRILL
HORIZONTAL
DRILL
DRILL
CENTER LINE
D
R
IL
L
DRILL CENTER HOLE
ON 3 TOP BOARDS ONLY
LAT. LINE
LAT. LINE
2-1/2”
2-1/2”
2-1/2”
2-1/2”
TOOLS NEEDED:
drill, 3/8” drill bit, pencil and tape measure or ruler.
BELSON PRE CUT & PRE DRILLED LUMBER KIT (OPTIONAL)
LUMBER KIT CONTENTS:
THE SIZE OF THE BOARDS DEPENDS ON TABLE/KIT MODEL, EITHER 6’ OR 8’ SEE INSTRUCTIONS FOR ASSEMBLY.
CENTER (1)
NO MITERED CORNERS, 5 HOLES
SIDE (2)
2 MITERED CORNERS, 5 HOLES
SEAT (2)
4 MITERED CORNERS, 4 HOLES
(5
th
HOLE FOR PLASTIC MODELS ONLY)
NATURAL
REDWOOD
ACQ
CEDAR
WEATHER
GRAY
S. Y. PINE
STAINED
TREATED
PLASTIC
PLASTIC
PLASTIC
6'
700111
700112
700113
700114
700115
700116
8'
700101
700102
700103
700104
700105
700106
6'
700131
700132
700133
700134
700135
700136
8'
700121
700122
700123
700124
700125
700126
6'
700151
700152
700153
700154
700155
700156
8'
700141
700142
700143
700144
700145
700146
SEAT
SIDE
CENTER
2
7
003
01
