BELRAM USXT2 Transmitter, Руководство пользователя, Страница: 9 / 12

Maintenance
Optical fiber connections are capable of transmitting very high bandwidths but are prone
to dust and dirt. Therefore we strongly recommend a good maintenance after every use.
There are a couple of simple and cost effective ways to easily clean both the cables and
connectors on the XT² extenders. These cleaning tools are available through Belram.
Cleaning the USXT² optical connector(s)
Required tooling:
Instructions:
1. Remove protective cap from Dry Cleaner.
2. Insert the tip of the Dry Cleaner in LC slot “a”.
3. Push down on the Dry Cleaner 4 - 5 times.
4. Remove Dry Cleaner and repeat for LC slot “b”.
5. The optical connector has been cleaned.
6. Repeat above steps if necessary.
• Dry Cleaner 1,25mm
9