Belnick YKC-1090-T-WAL-GG, Руководство по сборке

Страница: 7 / 7

STEP 4:
Place the Center Legs (Part 6) under the
Center Rail and unroll Support Slats until the first
screw hole is visible. Attach the Support Slats to the
Center Rail and Center Legs using (3) M6 – 50mm
NOTE: Do not fully unroll support
slats to begin. Once the first leg is
attached, slowly unroll slats until the
next screw hole is visible. Attach to
center rail and leg one at a time until
all 3 are attached.
Screws (Part B) . Tighten with M4
Allen Wrench
STEP 4:
Place the Center Legs (Part 6) under the
Center Rail and unroll Support Slats until the first
screw hole is visible. Attach the Support Slats to the
Center Rail and Center Legs using (3) M6 – 50mm
Screws, (3) Small Lock Washers (Part F) and (3)
Small Flat Washers (Part G). Tighten with M4 Allen
Wrench (Part I).
NOTE: Do not fully unroll support
slats to begin. Once the first leg is
attached, slowly unroll slats until the
next screw hole is visible. Attach to
center rail and leg one at a time until
all 3 are attached.
M4 Allen Wrench
STEP 4:
Place the Center Legs (Part 6) under the
Center Rail and unroll Support Slats until the first
screw hole is visible. Attach the Support Slats to the
Center Rail and Center Legs using (3) M6 – 50mm
Screws, (3) Small Lock Washers (Part F) and (3)
Small Flat Washers (Part G). Tighten with M4 Allen
Wrench (Part I).
NOTE: Do not fully unroll support
slats to begin. Once the first leg is
attached, slowly unroll slats until the
next screw hole is visible. Attach to
center rail and leg one at a time until
all 3 are attached.
Center Legs
Center Legs
M6 – 50mm Screw
M4 Allen Wrench
6
6
6
M6 – 50mm Screw
M4 Allen Wrench
Center Legs