1. Place the device on a comfortable chair near a polarized wall socket,
making sure that the crease between the bottom and back of the cushion
aligns with the same crease on your chair.
2. If you have long hair, be sure to tie it up to avoid it being caught in any
part of the device. Do not wear loose clothing or jewelry.
3. Take a seat with your feet flat on the floor and your knees positioned
above your ankles. Do not cover yourself or any part of the device with a
blanket or towel, or the device may become overheated.
4. Turn the device on. Press the timer button to choose your preferred
session time.
5. Choose your preferred settings (see the next section for more informa-
tion).
6. The device will automatically turn off after 5, 10, or 15 minutes—depend-
ing on the timer you set. You can also turn the device off manually by press-
ing the power button until it clicks.
7. Allow the device to cool completely before using it again. Do not use for
more than 15 minutes at one time.
8. When you are finished with your device, clean and store it according to
the instructions.
Massage Focus (upper back, lower back, full back)
On your remote, you’ll see three buttons next to the cushion diagram. These
allow you to choose whether you want your massage to be focused on your
upper, lower, or entire back. Whatever setting you choose, the correspond-
ing area of the cushion diagram will light up.
Shiatsu (Low, High)
Customize your preferred pressure by choosing either low-intensity or
high-intensity massage. Simply press the “Shiatsu” button once or twice to
alternate between settings.
Vibration (Low, Medium, High)
Press the “Vibration” button once, twice, or three times to choose between
the low, medium, or high settings. Press the button a fourth time to cycle
back to “low”.
Spot Target
To target the pressure of the kneading massage nodes to specific areas of
your back, simply press the “Spot” button to turn the feature on, then use
the up and down arrows to move the targeted massage nodes to different
positions along your spine.
Heated Massage
Need a little help boosting relaxation or improving circulation? Press the
“Heat” button to initiate a heated massage session. If the heat becomes too
intense for your preference, simply press the button again to turn the heat
off. The session will still continue until the end of your set time.
Demo
Check out all of this device’s amazing features with a convenient demo
session. As the device moves through different massage methods, the
targeted areas will light up on the cushion diagram on the remote. When all
features have been demonstrated, the device will automatically shut off.
3
4
Before things get awesome
To prevent potential injury or property damage, please read
this entire manual before operating your device. Keep it on
file for future reference.
Time to Relax
Using your Device
The many buttons of bliss
More about your device settings
