6519-888 9/05
A Division of KW AUTOMOTIVE North America, Inc.
6
10. SHOCK ABSORBER, SHOCK EXTENSION AND BUMP STOP INSTALLATION
10a)
Install SHOCK ABSORBER EXTENSIONS (Photo 18) (P/N 6654) as described in the
6654-88 instructions. (These instructions are included separately in the kit)
10b)
Install the appropriate BELLTECH Nitro-Drop® or Nitro-Active® rear shock absorbers
using the original hardware. See the current BELLTECH APPLICATION GUIDE or
contact your nearest BELLTECH Dealer for the appropriate part numbers for your
application. Tighten and torque hardware to 70 lb ft.
10c)
The BUMP STOP will also need to be replaced. Locate the BUMP STOP, one per side
and remove. (Photo 19) Here removal of the stock BUMP STOP is shown. In Photo
20, you can see a difference in height from the stock to the BELLTECH BUMP STOP.
2
1
3
4