Ź
MICHAEL BROW
6 0 4 - 5 5 5 - 1 2 1 2
10:00
AM
8/24
NEW
#
1
Ż
BROWING
6 0 4 - 5 5 5 - 1 2 1 2
10:00
AM
8/24
NEW
#
1
Time
Cordless Telephone Operation
Call Transfer
1.
When User expect to transfer a call made or receive from one handset to another, just simply
press the call transfer key & display will shows “EXT. NUMBER”, then press the handset
number to execute the number to execute the transfer.
2.
If the call transferred party do not pick up the call within 20 seconds the call will be bounced
back to initiate party, If initiate party do not pick up the transferred call within 20 seconds. The
Tel Line will be disconnected automatically.
Headset Feature
Your telephone can utilize a headset (not included) to be
connected to your
HANDSET
for you to enjoy hands-free
communication. Insert the small plug at the end of the
headset into the HEADSET JACK at the right side of the
HANDSET
. Follow the procedures discussed in “Receiving
Calls” and “Placing Calls” to receive and place a call.
NOTE
: When you plug the headset plug into the
HEADSET JACK it automatically mutes the
MICROPPHONE and SPEAKER of the
HEADSET
. Unplug the headset to return the
HANDSET
to normal use.
Headsets are available at most retail outlets that sell
telephone equipment. The HEADSET JACK is compatible
with 2.5 mm headset plugs only.
Redial Feature
1. If you get a busy tone, press the
button or
place the HEADSET on the BASE UNIT to hang up.
2. Later, press the
button again.
3. Listen for a dial tone.
4. Press the
button. This will automatically
redial the last telephone number you called in TALK
mode.
5. When you have finished with your call, press the
button again (the BASE UNIT IN USE LED
indicator will return off) or place the
HEADSET
on the
BASE UNIT
.
NOTE
:
If you are far away from the
BASE UNIT
, the
HEADSET
emits “beep” sounds to warn you that the
background noise level is too high for proper communication between the
HANDSET
and the
BASE
UNIT
. When you hear this sound, you should move closer to the
BASE UNIT
to reduce the noise
level. Otherwise, the call will automatically cut off.
Caller ID System Operation
Caller ID System
This telephone automatically displays an incoming caller’s name and telephone number together
with the date and time of the call. It records up to 80 calls and stores the data in Memory. Each
handset works independently for caller ID operation & function manual setting.
IMPORTANT
: You must subscribe to the Caller ID service from your local telephone company to
utilize this feature.
Viewing Caller Information During Incoming Calls
1. When there is incoming call, the name and the telephone number of the caller will automatically
appear after the second ring. Press the SHIFT RIGHT
Ź
button to view a name of more than 11
characters.
Ź
ĸ
Ш
Ż
Month/Date
Number of calls recorded
OR
Caller’s telephone number will appear if the caller’s name is not available.
OR
“OUT OF AREA” will appear if the origin of the incoming does not
support the Caller ID system.
OR
e.g.
“UNKNOWN” will appear if the origin if the incoming call has no
name and does not support the Caller’s name and /or telephone
number is blinked.
OR
e.g.
“PRIVATE” and/or “P--------“ will appear if the caller’s name and/or telephone number is blocked .
OR
“DATA ERROR” will appear if wrong data was received from the telephone line.
OR
The name stored in the DIRECTORY will appear for an incoming call with matching telephone
numbers.
MSG WAITING (Message Waiting)
The MSG WAITING GREEN LED indicator will blink when there is a message for you from your
requested Visual Message Indication from your local telephone company. “MSG WAITING” will
appear on the LCD Screen in STANDBY mode.
talk
Save/pause
redial
talk
talk
O U T O F A R E A
O - - - - - - - - - -
10:00
AM
8/24
NEW
#
13
TOTAL
42
U N K N O W N
U - - - - - - - - - -
10:00
AM
8/24
NEW
#
13
TOTAL
42
