background image

2.4GHz CORDLESS CALLER ID TELEPHONE 
WITH CALL WAITING

40 CHANNEL AUTOSCAN 

Model GH9620

OWNER’S MANUAL 
INSTALLATION AND 
OPERATING 
INSTRUCTIONS 

PLEASE READ THIS 
MANUAL CAREFULLY 
BEFORE USE.   
KEEP FOR YOUR 
REFERENCE. 

This system can be expanded to 9 handsets maximum.

For installation information, please 
see “Getting Started” instructions 
on or your separate Quick Start 
Guide.

Visit Us on the Web: 

www.uselectronics.info

©2004 BellSouth Corporation 

Special Features 

Congratulations on your selection of a quality 

BellSouth

 product.    With proper care, and by 

following the set-up and user instructions in this manual.    This unit will provide you with years of 
trouble-free service. 

BellSouth

 is committed to providing quality products that fit your needs. We would like to have any 

comments or suggests you might have on this product.    You may mail your comments to: 

U.S. Electronics 
105 Madison Avenue 
New York, NY 10016 

When examining your new 

BellSouth

 cordless telephone, you will find an array of special features 

including:

CORDLESS TELEPHONE FEATURES 

Filtered Sound

System 

– Gets considerably less noise than conventional cordless telephones 

because of a special circuit which delivers the clearest possible reception. 

40 Channel Auto Scan 

– Press the button 

 on the 

HANDSET

 to find and lock on the 

clearest channel for any call.

Desk or Wall Mount – 

Use this equipment as a desk phone or as a wall phone. 

Tone or PULSE Dialing

 – Use this phone for either TONE or push-button PULSE (rotary) dialing. 

Automated Functions

 – Redial the last number called and automatic STANDBY mode. 

Security – 

Ensures greater privacy because a built-in security code with 65,536 combinations 

prevents use of your telephone line by another nearby cordless phone. 

Dependable Battery 

– Recharge your BATTERY PACK many times with the built-in charger. The 

battery low warning tone tells you when the BATTERY PACK needs recharging.) 

Special Services – 

Use the 

  button to access special services such as Call Waiting supplied 

by your Telephone Company or company switchboard. 

STANDBY Mode –

 When in STANDBY mode (ON-HOOK), the phone is capable of receiving a call. 

When the 

HANDSET

 is on the 

BASE UNIT

, it is automatically in the STANDBY mode (ON-HOOK).   

When the 

HANDSET

 is taken off the 

BASE UNIT

, it remains in the STANDBY mode until you 

activate the 

 button  

Battery Power Saver – 

Once fully charged, in STANDBY mode, the HANDSET can receive/send 

calls for a maximum of give days without the need for recharging. Length of charge depends on 
frequency of use. 

Luminous LCD Screen –

 The LCD Screen emits light for 5 seconds every time you press any of the 

buttons on the 

HANDSET

, or when calls come in. 

HANDSET Ringer Level 

– Select the ringer volume level (HI, LOW, OFF). 

HANDSET VOLUME CONTROL Switch 

– Select the receiver volume level (HI, MID, LOW). 

HEADSET JACK

 – Your telephone can utilize a headset for hands-free communication. 

BELT CLIP

 – Use the BELT CLIP to hang your 

HANDSET

 on your belt. 

talk

flash

Scan

delete

Содержание GH9620

























Отзывы: