Desk Mounting
One of the special features of your telephone is the unique design of the MOUNTING BRACKET
which can hold your phone at an angle of 15° when desk mounting. There are two positions to
choose from:
1.
NORMAL POSITION (MOUNTING BRACKET not required):
For normal position, as shown in Figure 1, place
the
BASE UNIT
on any desired but suitable
location.
2.
15° POSITION (See Figure 2):
With the back of the
BASE UNIT
facing up, insert
the hooks of the MOUNTING BRACKET (with the
position as shown in Figure 3) into the upper slots
of the
BASE UNIT
. Then slide the MOUNTING
BRACKET upward until it locks into place.
Wall Mounting
You may choose to put the
BASE UNIT
of your cordless
telephone on a wall.
1.
With the back of the
BASE UNIT
facing up, insert
the hooks of the MOUNTING BRACKET (with the
position as shown) into the lower slots of the
BASE
UNIT
. Then slide the MOUNTING BRACKET upward
until it locks into place.
2.
Connect the SHORT TELEPHONE LINE CORD to the
TELEPHONE LINE CONNECTION JACK.
3.
Plug the free end of the SHORT TELEPHONE LINE
CORD into the MODULAR WALL JACK.
4.
Align the upper keyhole on the
BASE UNIT
with the
upper stud of the wall plate, so that the keyhole
opening on the MOUNTING BRACKET matches the
lower stud, then pull the
BASE UNIT
down until it is
securely seated.
Desk Mounting
10
FIGURE 1
FIGURE 2
FIGURE 3
MODULAR
WALL JACK
WALL
PLATE
WALL PLATE STUD
4
5
5
MOUNTING
BRACKET
SHORT TELEPHONE
LINE CORD
1
2
3
3
3
3
Содержание GH9488
Страница 54: ...Notes 46...
