BellSouth FILTERED SOUND MH9910V4, Руководство пользователя

Страница: 10 / 42

10
Getting Started
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN
connection jack on the back of the BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
5. Insert one plug of the TELEPHONE LINE CORD into the house
TELEPHONE JACK and the other into the telephone line jack on
the back of the BASE UNIT. (If you have an older 4-prong telephone
jack, you will need an RJ-11C TELEPHONE JACK ADAPTOR. This
adaptor is available at the same place you purchased your telephone.)
6. Set the date and time. (See page 26 for details.)
7. Raise the ANTENNA on the BASE UNIT for the best reception.
8. We recommend not placing this unit next to appliances. Doing so may
cause
interference.
9. TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing system, set the
TONE/PULSE select switch to the TONE position.
B. If you have a rotary dialing system, set TONE/PULSE select switch to the
PULSE position.
C. If you are unsure which system you have, set the TONE/PULSE select
switch to the TONE position. Press the TALK button on the HANDSET to
get a dial tone, and press any key on the keypad except the zero. If the
dial tone continues, you do not have tone dialing service. Press the TALK
button on the HANDSET to hang up. Set the TONE/PULSE select switch to the
PULSE mode and try again.
TELEPHONE LINE CORD
POWER-IN
SOURCE
BASE UNIT
ANTENNA
120V WALL OUTLET
AC ADAPTOR
TELEPHONE JACK
TELEPHONE
CONNECTION
JACK
TONE/PULSE
SELECT SWITCH
BASE UNIT