3
On the Base Unit:
Press [MENU] and “REGISTRATION” appears on the
display.
Press [O.K.] and “W AITING REGISTER” is displayed.
You are now ready to register your handset.
Note:
The base unit will return to standby mode if no
handset registration takes place within 25 seconds.
On the Handset:
After the handset is charged, rem ove it from the
recharge cradle. “HS_ _” is displayed
Press [MENU] and “REGISTRATION” appears on
the display.
Press [O.K.] and select “ADD A HANDSET?”.
Press [O.K.] to register and “CONNECTING” is
displayed for 1 to 2 seconds.
If the handset displays “REG OK NEW ID=2”, the
connection with the base unit is established.
If the handset displays “NO CONNECTION”, repeat
the above steps all over again.
The handset will return to “REGISTRATION” after 2
seconds. Press [EXIT] to end the registration.
You are now ready to use your new handset
REGISTRATION
O.K. EXI
T
WAITING REGISTER
EXI
T
NO NEW CALL
HS_
╴
_
10:00
AM
1/01
SAVE MENU SERVICE DIR.
DI
AL V.M.
REGISTRATION
HS_ _
O.K. EXI
T
ADD A HANDSET?
O.K. EXI
T
REG OK NEW ID=2
NO NEW CALL
HS-3
10:00
AM
1/01
SAVE MENU SERVICE DIR.
DI
AL V.M.
GET T IN G STAR T E D
