background image

Limited Lifetime Warranty

[Please note: 

You are responsible to inspect your mount thoroughly for missing or defective parts immediately after

opening the box. To receive replacement or missing part(s) under this Warranty, visit our website at www.bello.com

or call our Customer Service Department at 1-888-779-7781. Please have the model number, date code, part

number(s) and your sales receipt or other proof of purchase available for reference. We will ship you any necessary

replacement parts without charge at our expense.]

This Bell’O International, Corp. (“Bell’O” or “we”) mounting product SKU # 8315 or 8325 (“Product”) is

warranted for the life of the Product only to the original purchaser and limited to the original installation

(“Warranty”). Re-installation of the Product in a different location or with a different monitor or peripheral voids

this Warranty. This Warranty is only valid in the United States of America.

We warrant to the original purchaser that the Product and all parts and components thereof are free of defects in

material and workmanship. “Defects”, as used in this Warranty, is defined as any imperfections that impair the

use of the Product.

Our Warranty is expressly limited to replacement of mount parts and components. Bell’O will replace any part

listed on the enclosed mount parts sheet that is defective in material or workmanship only to the original owner

within the limitations stated herein.

This Warranty applies only under conditions of normal use. The Product is not intended for outdoor use. This

Warranty does not cover: 1) defects caused by improper installation or disassembly; 2) defects caused by ship-

ping (claims for damage during transit to you should be made immediately by you directly to the transportation

company); 3) defects occurring after purchase due to modification, intentional damage, accident, misuse, abuse,

negligence, natural disaster, abnormal mechanical or environmental conditions, unauthorized disassembly,

repair, modification or exposure to the elements; 4) cosmetic damage and 5) labor or assembly costs.

This Warranty does not apply if the Product has been repackaged or resold as second-hand.

There are no warranties, express or implied, including without limitation merchantability or fitness for particular

use, except as (i) contained herein or (ii) required by applicable law in the state whose law governs.  The

substantive and procedural law of the State of New Jersey shall govern this Warranty, absent controlling law

imposing the law of another state in lieu thereof as governing law. New Jersey Superior Court or the United

States District Court for the District of New Jersey, as appropriate, shall retain exclusive jurisdiction over

enforcement of this Warranty and all subject matter hereof. All warranties of whatsoever derivation shall be

limited to the terms set forth herein, unless otherwise required by applicable law. 

You shall not rely on manufacturers’, employees’ or representatives’ statements, whether oral or written, which

neither modify this Warranty nor are they part of either your purchase contract or this Warranty. 

Except as provided herein, Bell’O has no liability or responsibility to you or any other person or entity with

respect to any liability, loss or damage caused directly or indirectly by use of the Product, including, but not

limited to, any incidental or consequential damages. Some states do not allow limitation on how long an implied

warranty can last or the exclusion or limitation of incidental or consequential damages.  Therefore, the above

limitations and exclusion may not apply to you.

This Warranty covers only repair or replacement for this mount as stated above. 

This Warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Visit www.BellO.com for more information on home theater furniture.

Visit www.Dummies.com for other great products, books, and free eTips!

Visit www.Paladin-Tools.com for information on the Cable & Satellite Installation Kit For Dummies.

English

Содержание 8315





















Отзывы: