Bellman BE1420, Руководство пользователя, Страница: 3 / 4

Default signal pattern
Transmitter Receiver signal pattern
LED LED Sound Vibration Flash
ƒ
Green light Green light 1
¯
door chime, low Slow Yes
Changing the signal pattern
Changing the signal pattern is easy. Just open the transmitter front cover and move signal switches
no. 8, 9 and 0 according to the table below:
Transmitter Receiver signal pattern
Switch LED Sound Vibration Flash
Green light 1 ¯ door chime, low Slow Yes
2 ¯ green blinks 2 ¯ door chime, low Slow Yes
3 ¯ green blinks 1 ¯ door chime, high Slow Yes
Green blinks 2
¯
door chime, high Slow Yes
Orange light Baby melody Fast Yes
Orange blinks Baby melody Fast Yes
Yellow light 1 ¯ ring signal, low Medium Yes
Yellow blinks 2 ¯ ring signal, high Medium Yes
Testing the connection
Using the front button
1 Press the front button on the transmitter. The LED lights up
in green to show that a radio signal is being transmitted.
2 The green Visit LED on the receiver lights up to show that
the signal was received. In addition, it starts to sound, flash
or vibrate with a certain pace, called signal pattern.
The transmitter determines the signal pattern and the
default is as follows:
1 2
Visit push button transmitter
On
Off