70
71
Setting the Activation Pattern
The Bellman Visit 868 Repeater can be activated in two different ways.
On delivery the Repeater sends the same signal regardless of the input causing the activation.
By changing the Signal Switches (4), different inputs on the same Repeater can transmit different Signal
Patterns.
In this way the same Repeater can be used to forward signals from the Bellman Visit 868 System at the
same time as it can transmit a Door Signal when activated via the Exterior External Trigger (3) and a
Baby Cry signal when activated via the Test Button (2).
The following figure shows the standard settings that are available:
Type
LED pattern
Sound
Vibration
Flash
Orange 2
Orange blinks in
sequences of two
Baby
Rapid
Yes
Orange 3
Orange blinks
in sequences of
three
Baby
Rapid
Yes
Orange 4
Orange blinks
constantly
Baby
Rapid
Yes
VMA
Red and Orange
constantly blink
alternately
VMA constant
Long
Yes
Fire alarm
Red blinks
constantly
Fire alarm
constant
Long
Yes
Signal
switch
Exterior external
trigger
Pushbutton
Green 1
Green 1
Green 2
Green 2
Green 3
Green 3
Green 4
Green 4
Orange 1
Green 4
Orange 2
Green 3
Orange 3
Green 2
Orange 4
Green 1
