Bellman & Symfon BE1340, Инструкция пользователя, Страница: 2 / 4

Miscellaneous
The flash
There is a light sensor (3) mounted on the clock face which regulates the number of flashes and their interval to approx. 12
during the day and approx. 8 at night. When indicating a telephone ring signal (if the clock is connected to a telephone outlet),
the clock always sends 5 flashes, day and night.
Extra knob for turning the alarm On/Off
There is an extra knob that can be mounted on the regular knob (5) for alarm On/Off to increase usability.
See the instructions at the back of this manual.
Illumination of clock face
The clock face can be illuminated at any time by pressing the snooze button (4).
The clock face is automatically illuminated at wake up.
Connection of Bellman Visit Bed-shaker
One or two Bellman Visit Bed-shakers can be connected to the outlets (16) marked on the back of the clock.
The vibration pattern during wake-up is short vibrations with long pauses. When indicating a telephone ring signal (see
‘Connection to telephone outlet’ below), it is repeated short vibrations. These vibrations continue for 30 seconds or until the
snooze button (4) is pressed (or for no more than 30 seconds when indicating ring signal).
Connection to telephone outlet
On the back of the clock there is an outlet (15) for connection to the telephone line. When there is an incoming call, the alarm
clock will signal with a ring signal and flashes.
The connecting cable is an accessory which can be obtained at your nearest Bellman & Symfon retailer.
External triggering
The alarm clock can be triggered by an external source via the inlet Ext. trig (13) on the back of the clock. The sound and the
vibration patterns of connected bed-shakers are set via the switches 1-4 ( 8) marked ‘EXT.TRIG’. To reset or turn the signal
off, simply press the snooze button (4). See further technical information.
Troubleshooting
Follow the troubleshooting instructions below before calling for service.
Symptom Action
There is no flash Check the switch (9) that turns the flash On/Off
Check that the power adapter is connected and/or that the back-up battery is charged - see the
heading, ‘Power supply indicator’
There is no sound Check the switch (7) that turns the sound On/Off
Check that the power adapter is connected and/or that the back-up battery is charged - see
‘Power supply indicator’