Bellini BTT815, Руководство пользователя

Страница: 6 / 8

6
• The toaster turns off when the desired toast
colour is achieved and automatically raises
the toast. The toasting process can be
stopped at any time by pressing the Cancel/
Stop button. Unplug the toaster immediately
after use.
Note:
• Allow the toaster 15-20 seconds to cool
before beginning the next toasting
cycle. This permits the electronically
controlled thermostat to reset for the
next toasting cycle.
• The metal grills will automatically adjust
to the thickness of the slices.
• The High lift / bread release lever can
only be locked in the lower position
when the appliance is plugged in.
• After extended use, crumbs or dust may
block the locking system. To correct
this, simply press down the High lift
/ bread release lever several times
successively to lock it and please refer
to maintenance and cleaning tips.
Warning: Do not leave it unattended when
it is in use as toast may jam or wedge in
the bread carriage.
Caution: Do not use a knife or another
sharp metal tool to remove bread
from the toaster and do not touch the
metal internal parts of the toaster.
Toasting Frozen Bread
To toast frozen bread which has been removed
from a freezer, place one to two slices of frozen
bread into the toasting slots, set the desired
browning setting, lower the high lift lever until
it clicks into place, and then press the Defrost
button, the Defrost button lights up.
Note: Toasting frozen bread takes longer
than toasting defrosted bread.
Reheating Toasted
Bread
This function allows you to reheat toast without
additional toasting. To reheat, place the toasted
bread back into toasting slots, lower the high lift
lever until it clicks into place and then press the
Reheat button, the Reheat button lights up.
Note: When using the reheat function,
keep a close eye on the bread to ensure
it doesn’t burn.
Interrupting Toasting
Process
• The toaster has a Cancel/Stop function so
that you can interrupt the toasting process at
any time by pressing the Cancel/Stop button.
The bread will automatically pop up. (For
example, if you realize that the settings are
not properly adjusted or if you think the bread
is sufficiently toasted, you can easily cancel
the toasting process.)
• If the bread jams in the slots and the elements
do not switch off, remove the plug from the
wall outlet and wait for the appliance to cool
down. Then carefully remove the bread from
the toaster slot, taking care not to touch the
heating elements. To remove smaller items, lift
the High lift lever approximately 10mm above
the starting position.
Stopping The Toasting
Process
• Once toasted, the operating control is
automatically unlocked, the slices of bread
pop up and the toaster stops working.
• To stop the toaster at any time or cancel the
other functions, press the Cancel/Stop button
and the bread will pop up and the toaster will
switch off.