5
Correct positioning of
your Wine Cellar
Well Ventilated
There is a need for good ventilation around
the Wine Cellar for easy dissipation of heat,
high efficiency for cooling and low power
consumption. For this purpose, sufficient clear
space is needed around the Wine Cellar with
its back at least 50mm away from the wall, its
sides at least 100mm away from walls and no less
than 100mm space from the top. A clear space
should be left to open its door to 160°.
Protection From Moisture
Avoid placing the Wine Cellar in a place where
heavy moisture is present so as to minimize the
possibility of rusting it’s metal parts.
The Wine Cellar should not be directly sprayed
with water as this could result in poor insulation
and current leakage.
Protection From Heat
The Wine Cellar should not be stored near any
heat source or direct sunshine.
The temperature range of this Wine Cellar is
highly dependent on where it is stored. The
ideal conditions for this Wine Cellar is inside the
household, away from direct sunlight, or high
ambient temperatures.
Stable Installation
Place the Wine Cellar on a strong and level floor.
Putting the Wine Cellar on carpet may cause a
temperature rise. In such a case, place a hard
wooden board or rubber mat between the
carpet and the unit.
Moving
Before relocating or moving your Wine Cellar
unplug the power cord, remove the contents
and fasten the door with adhesive tape to
prevent the door from opening while moving.
Technical Specifications
Model No.
BTJC28G
Volume
28L
Rate voltage AC
220-240V
Input power
50W
Rated frequency
50Hz
Tem control range
12-18°C
• Specification are subject to change without
prior notice .
• If the specifications differ from the rating
label, please refer to the rating label.
