Bellini BTDK120, Руководство пользователя

Страница: 5 / 8

Getting to Know Your
Dome Kettle
Congratulations on the purchase of your new
Bellini Dome Kettle.
Before using your new dome kettle for the first
time, it is extremely important that you read
and follow the instructions in this booklet, even
if you feel that you are familiar with this type of
appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a
safe and convenient place to keep this booklet
handy for future reference.
This appliance has been designed to operate
from a standard domestic power outlet. It is not
intended for industrial or commercial use.
How to use Your Dome
Kettle
Before using your new dome kettle for the first
time, carefully unpack the appliance and remove
all the packaging material.
Fill the kettle to the maximum level indicated by
the “MAX” water level mark on the water Level
Indicator and boil the water. Drain this water
thoroughly before using for the first time to ensure
the kettle is completely clean.
Operation
Remove the lid of the kettle and fill with water to
the desired level. Take care not to fill above the
“MAX” water level mark as water may eject
from the kettle during boiling. Always fill using
fresh water and discard any excess boiled water
after use.
Replace the lid on the kettle.
Place the power base on a dry and level surface.
Place the kettle onto the power base.
Insert the power cord into a standard domestic
power outlet and switch on.
Switch the kettle on by pressing the “On/Off”
switch downwards. The power indicator light
illuminates to indicate that the kettle is in use.
When the water has boiled, the kettle and the
power indicator light will switch off automatically.
Water can be brought back to the boil by pressing
the “On/Off” switch downwards again.
If the kettle has recently boiled and switched off
automatically, it may be necessary to wait for a
maximum of 15 seconds before the switch can
be reset.
You can stop the boiling process at any time
by gently lifting the “On/Off” switch to the “Off”
position or by turning the power outlet off.
To remove the kettle from the power base, grasp
the handle and hold the kettle upright while
lifting it clear of the power base. Take extra care if
the kettle is full.
Do not UNDER-FILL. Ensure the water covers the
minimum level on the Water Level Indicator.