9
2. Based on above drawing and dimension to drill holes(8mm diameter) and hammer
dry wall anchor plugs
into
holes
3.
Use
2pcs ST4x8mm screws
to attach lower and upper chimney together, do not fasten screws too much, make
sure
upper decorative chimney
can be telescopically adjusted after assembled.
4. Fit the
flexible exhaust pipe
onto
outlet
with the 153mm end. Use a strap to tighten the pipe.
* If choose air extraction mode, please install
the flexible exhaust pipe
; if choose air recirculation mode, no
need to install
the flexible exhaust pipe
, please skip this step and jump to step
5
directly
5. Remove
grease mesh filter
and install active charcoal filter onto motor chamber according to below drawing.
* If choose air extraction mode, please skip this step and jump to step
6
directly. if choose air recirculation
mode, we strongly recommend you have charcoal filter installed
.
6. Secure the
hood mount bracket
onto wall with 3 x
ST4x
4
0mm screws
, making sure screws are securely
tightened
, secure the upper chimney bracket onto wall with 2 x ST4x30mm screws.
Upper decorative chimney (Inner)
Lower Chimney bracket
Lower decorative chimney (Outer)
GSM Retail Australia
Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust OR 0508123108 NZ www.belliniappliances.com.au
Model: BRA603GCX-1F FINELINE: 5102979 AUS & NZ BRA903GCX-F FINELINE:
0221292
NZ BRA903GCX-1 FINELINE: 5103059
AUS 60cm/90cm Curve Glass Rangehood
Charcoal Filters are available at your local Bunnings
Part Number: CF110 Fineline:5102399
