9
B: Install into cabinet
1. According to below drawing to determine where want to place the range hood, and drill 4 holes with 4mm
diameter at the hanging board of your cabinet.
2. Fit the
outlet
on top of range hood body.
3. Install the range hood onto the bottom of cabinet board, insert 4pcs
Screw(ST4x30mm)
into the holes and
fasten.
Warning: Failure to install the screws or fixing device in accordance with these instructions may result in
electrical hazards
Installation of charcoal filters
When you choose front recirculation mode, charcoal filter is a must to be installed. Charcoal filter is optional
accessory. To install charcoal filter, you will need to fit
outlet cover
firstly, remove
grease mesh filters
and fit
charcoal filter on.
545mm(60cm hood), 845mm(90cm hood)
215mm
35.5mm
75.75mm