GSM Sales Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust OR 0508123108 NZ
www.belliniappliances.com.au Model: BFG509W-F Fineline: 5104012
5
0cm Freestanding Gas Oven
The appliance must be connected in accordance with the currently
applicable regulations. Before installing the appliance, check that the
local conditions (type of gas and pressure) are compatible with the
appliance settings. The permissible appliance settings can be found
on the rating plate.Connection to the gas lines and seal fitting must be
carried out professionally according to the currently applicable
standards.
Gas connection on the appliance
The gas connection is located at the rear left of the appliance.
Connecting pieces
NG corrugated tube union(and seal)
Gas connection
An inlet manifold extension pipe must be fitted to the appliance.
Ensure that the pipe is connected using the washer provided and
that the bracket is screwed to the appliance as shown in the
diagram below.
Fit the supplied pressure regulator (for Natural gas) using the NG
test point adaptor and washer to the inlet manifold. Ensure the
arrow is pointing towards the appliance and that pressure testpoint
is accessible from the final position.
Push the cooker back and install the anti-tilt bracket.
Connect the appliance to the consumer piping outlet using only
fixed piping.
This final connection is made when the product is pushed back into
position by access under the cooker.
9