9
Use 2 x
ST4x
8
mm
screws to
attach lower and upper chimney together, do not fasten screws
too much, make sure upper decorative chimney can be telescopically adjusted after assembled
4
.
Fit the flexible exhaust pipe onto outlet with the 153mm end, use a strap to tighten the pipe.
*If you choose air extraction mode, please install the flexible exhaust pipe, if you choose air recirculation
mode, no need to install the flexible exhaust pipe, please skip this step and jump to st
e
p
5
5.
Remove the grease mesh filter and install active charcoal filter (Not Supplied) onto motor chamber refer
below drawing.
*If you choose air extraction mode, please skip this step and jump to step 6, if you choose air recirculation
mode, we strongly recommend
to
use a charcoal filter (Not Supplied).
Charcoal Filters are available at
your local Bunnings Part Number: CF110 Fineline:5102399
6
.
Secure the hood mount bracket onto wall with 3 x ST4 x 40mm screws, making sure screws are securely
tightened.Secure the upper chimney bracket onto wall with 2 x ST4 x 30mm screws.
Remove all blue protective film on chimney and cooker hood, the installation is now finished.
Based on above drawing and dimension to drill holes(8mm diameter) and hammer dry
wall anchor plugs into holes
.
2.
3.
GSM Retail Australia Pty Ltd
ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust OR
0800 764 912 NZ
www.belliniappliances.com.au
Model: BDRA603TBX FINELINE: 5102976 AUS, BDRA603TBX-F FINELINE:
0220236
NZ, BDRA903TBX FINELINE:
5102977
AUS, BDRA903TBX-F FINELINE:
0220233
NZ 60cm/90cm Black Fascia Canopy Range hood
