10
2. Use the
installation guide template
to determine where screw mount holes should be drilled. Make sure
vertical and horizontal line on the
installation guide template
superpose with the line just drew on the wall.
3. According to the position just marked by
installation guide template
, drill holes(diameter 7mm) on the wall
and hammer
dry wall anchor plugs
into holes.
4. This step is only for BR6/903CPX, BR6/903CPX-F.
Use
2pcs ST4x8mm screws
to attach lower and upper chimney together, do not fasten screws too much, make
sure
upper decorative chimney
can be telescopically adjusted after assembled.
5. Fit the
flexible exhaust pipe
onto
outlet
.
* If choose air extraction mode, please install
the flexible exhaust pipe
; if choose air recirculation mode, no
need to install
the flexible exhaust pipe
, please skip this step and jump to step 6 directly
6. Remove
grease mesh filter
and install active charcoal filter onto motor chamber according to below drawing.
* If choose air extraction mode, please skip this step and jump to step 7 directly. if choose air recirculation
mode, we strongly recommend you have charcoal filter installed;
Upper decorative chimney (Inner)
Lower Chimney bracket
Lower decorative chimney (Outer)
