16
Clean filter assembly
The filter is used to avoid the big remnants and other sundries getting inside the pump, efficiently removes food
particles from the wash water, allow recirculation during the cycle. The residue can obstruct the filter sometime
so suggest removing the larger food particles trapped in the filter after each wash cycle by rinsing the
semicircular filter and cup under running water.
For best performance and results, suggest clean the filter assembly every week.
To remove the filter assembly, pull on the cup handle in the upward direction.
To clean the coarse and the micro filter, use a cleaning brush.
Contrarotate to unscrew the coarse filter, you can remove the filter system. Remove any food remnants and
clean the filters under running water.(Refer to page 2 “product description” to understand more about filter
system)
Then, reassemble the filter parts as shown in the figures below and reinsert the entire assembly in the
dishwasher, positioning in its seat and pressing downward.
Attention!
The dishwasher must never be used without the filters. Improper replacement of the filter may reduce the
performance level of the appliance and damage dishes and utensils.
Never run the dishwasher without the filters in place. When cleaning the filters, don't knock on them.
Otherwise, the filters could be contorted and the performance of dishwasher could be debased.
