8
Product dimensions:
L: x W: x H( mm)
580X510X55
Aperture
dimensions: L: x W:
x H( mm)
560X490
Product speci
fi
cations:
4 Ceramic elements
2 x 1.8kw,
2 x 1.2kw
Electrical details
220-240 Vac 50 Hz
30 A (double pole
switched fused outlet
with 3mm contact gap)
Max Rated Inputs:
see the content on
rating label.
Mains Supply Lead:
H05RR-F 3 core x
2.5MM
2
(not supplied)
Problems
Possible Cause and
solve
The cooking
zones are not
functioning or
will not switch
on.
Check that the mains
electrical supply to the
appliance is correct
and working. Check the
mains fuse.
A humming
sound is heard
when a cooking
zone is selected.
This is normal; the
sound will disappear
when the zone heats up
The cooking
zones have
become
discoloured
This maybe caused
by burnt on remnants
of food. This will not
affect the working of the
appliance. However you
should make sure that
the cleaning instructions
are being followed
regularly.
Only two of the
zones on my hob
are working
You should recheck
that the terminal screws
are all fully tightened
between the links.
•
The “green-yellow” earth wire must be
connected to the terminal marked. It must be
about 10 mm longer than the live and neutral
wires.
•
The “blue” neutral wire must be connected to
the terminal marked with letter (N) - the live
wire must be connected to the terminal marked
with letter (L).
Troubleshooting Guide
How to Use Your Hob
Product speci
fi
cation
IMPORTANT: If your appliance appears not
to be operating correctly, then you should
disconnect it from your mains supply and
then contact the Service Department.
DO NOT ATTEMPT TO REPAIR THE
APPLIANCE YOURSELF.
Plate layout
Before
fi
rst use
IMPORTANT:
You should clean the hob surface
and solid plates (see “Cleaning and maintenance”
section).
•
You should switch on one cooking zone at a
time, for 5 minutes at the maximum setting.
This will help to eliminate any new smell that
exists and evaporate any humidity that has
formed on the heating elements during transit.
