2. Once the installation height of hook,inside chimney bracket and safety hole
is fixed according to the
pic 1,
drill 6 φ11mm holes on the wall.
600
195
450
2
0
0
195
195
275
275
.
Insert 7 pcs wall plugs into the holes of inside and outside chimney brackets as well as the safety hole.
Put 4 pcs M6*60 screws into the corresponding 4 holes for the hook and fix it on the wall.
Then use 2
pcs ST4*40mm screws to install the inside chimney bracket on the wall.
.
Open and take down the 8 filters in order following the 3 steps
Hang the cooker hood on the hook.
Fasten ST4*30mm screws to the two safety holes on the cavity and fix the cooker hood. Note: The two
safety vents are positioned on the back housing, with diameter of 6mm. See pic 5.
Lay the expansion pipe to the two blower outlet, and fix the expansion pipe with a cable tie. See pic 6.
Put the inside chimney into the outside chimney,and hang the outside chimney bracket to the hole of
outside chimney. See pic 7.
Fix the outside chimney bracket on the wall with 3 pcs ST4*40 screws. See pic 8.
.
3
4
5.
6.
7.
8.
9.
pic 9
pic 8
pic 7
pic 6
pic 5
pic
4
See pic .
4
See
pic
pic
3
3.
pic
pic
2
1
See pic .
2
