![Bellini 133506 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/bellini/133506/133506_installation-and-user-manual_2729849004.webp)
SAFETY INSTRUCTIONS
T
hismanualexplainstheproperinstallationanduseofyour
range
hood,
pleasereaditcarefullybeforeusingevenifyouarefamiliarwiththeproduct.
Themanualshouldbekeptinasafeplaceforfuturereference.
Nevertodo:
●
D
o not try to use the
range
hood
without the grease filters or if the filters
are excessively greasy!
●
D
o not install above a cook
top
with a
high level grill.
●
D
o not leave frying pans unattended
during use because overheated fats or
oils might catch fire.
●
N
ever leave naked flames under the
range
hood.
●
I
f the
range
hood is damaged, do not
attempt to use.
●
D
o not flambé under the
rangehood
.
●
C
AUTION: Accessible parts may
become hot when used with cooking
appliances.
●
T
he minimum distance between the
supporting surface for the cooking
vessels on the hob and the lowest part
of the
rangehood
. (When the
rangehood
is located above a gas appliance,
this
distance shall be at least 65 cm)
●
T
he air must not be discharged into a
flue that is used for exhausting fumes
from appliances burning gas or other
fuels.
Alwaystodo:
●
I
mportant! Always switch off the
electricity supply at the mains during
installation and maintenance such as
light bulb replacement.
●
T
he
range
hood must be installed in
accordance with the installation
instructions and all measurements
followed.
●
A
ll installation work must be carried
out by a competent person or qualified
electrician.
●
P
lease dispose of the packing material
carefully. Children are vulnerable to it.
●
P
ay attention to the sharp edges
inside the
rangehood
especially
during installation and cleaning.
●
M
ake sure the ducting has no bends
sharper than 90 degrees as this will
reduce the efficiency of the
rangehood
.
●
W
arning: Failure to install the screws
or fixing device in accordance with
these instructions may result in
electrical hazards.
●
W
arning: Before obtaining access to
terminals, all supply circuits must be
disconnected.
3