background image

Safety

                   5.160

only. It must not be used 

for other purposes, for 

example room heating.

Induction Hob

Parts of the appliance 

may become hot while 

in use. Always make 

sure that children 

are supervised when 

they are near to the 

appliance.
Always position pans 

over the centre of the 

cook zone, and turn 

the handles to a safe 

position so they cannot 

be accidentally knocked 

or grabbed.
Do not leave pans on 

the hob when you’re not 

around - take them off 

the cook zone  if you 

have to leave the kitchen 

even if you think it will 

only be for a moment, 

while you answer the 

door or phone. 

If you use a griddle plate 

ensure it is completely 

cool before attempting 

to lift it from the hob as 

residual heat may cause 

burns, Always use oven 

gloves to protect your 

hands. 
The appliance has a 

glass hob top, make 

sure you do not drag 

pans across the ceramic 

surface as this will 

lead to scratches and 

damage.
Do not use the hob 

surface as a chopping 

board or food 

preparation area as this 

may lead to it becoming 

damaged.
The glass ceramic can 

get hot whilst cooking; 

even though the cook 

zone itself does not 

generate heat. The heat 

generated is conducted 

back from the hot pans.

Содержание IH60XL





























Отзывы: