InstallatIon InstructIons - dual fuel products
levelling Your cooker
Place a spirit level on a baking sheet onto
an oven shelf.
The cooker is fitted with LEVELLING FEET
(1)
. Level your cooker to your desired
height using the levelling feet at the front
and rear of the cooker.
stability bracket
If the cooker is fitted with a flexible
connection, a stability bracket should be
fitted to engage in the back of the cooker.
A stability bracket can be bought from
your local supplier.
A stability bracket can be fitted as follows:
Place the cooker in position and draw a
PENCIL LINE level with the front edge
(2)
.
Mark the centre of the cooker to give a
CENTRE LINE
(3)
.
Remove the cooker and mark off 200mm
to the right of the centre line
(4)
on the
rear wall.
Measure from FLOOR LEVEL to the
ENGAGEMENT EDGE where the stability
bracket will rest and add 2mm
(5)
.
Transfer this dimension to the rear wall
and secure the bracket to the wall at this
height
(6)
using the two off centre holes in
the single bracket.
24
Levelling Your Cooker
Place a spirit level on a baking sheet
onto an oven shelf.
The cooker is fitted with LEVELLING
FEET
(1)
. Level your cooker to your
desired height using the levelling feet
at the front and rear of the cooker.
Stability bracket
If the cooker is fitted with a flexible
connection, a stability bracket should
be fitted to engage in the back of the
cooker. A stability bracket can be
bought from your local supplier.
A stability bracket can be fitted as
follows:
Place the cooker in position an d
draw a PENCIL LINE level with the
front edge
(2)
.
Mark the centre of the cooker to
give a CENTRE LINE
(3)
.
Remove the cooker and mark off
200mm to the right of the centre
line
(4)
on the rear wall.
Measure from FLOOR LEVEL to the
ENGAGEMENT EDGE where the
stability bracket will rest and add
2mm
(5)
.
Transfer this dimension to the rear
wall and secure the bracket to the
wall at this height
(6)
using the
two off centre holes in the single
bracket.
Installation Instructions
���
���������� ����
���
��������� ����
���� �� ������
���� ����
���
�����
�����������������
���
������ ���������� ���������
������ ��� ���� ���������
���
������ ����
���
������ ����
24
Levelling Your Cooker
Place a spirit level on a baking sheet
onto an oven shelf.
The cooker is fitted with LEVELLING
FEET
(1)
. Level your cooker to your
desired height using the levelling feet
at the front and rear of the cooker.
Stability bracket
If the cooker is fitted with a flexible
connection, a stability bracket should
be fitted to engage in the back of the
cooker. A stability bracket can be
bought from your local supplier.
A stability bracket can be fitted as
follows:
Place the cooker in position an d
draw a PENCIL LINE level with the
front edge
(2)
.
Mark the centre of the cooker to
give a CENTRE LINE
(3)
.
Remove the cooker and mark off
200mm to the right of the centre
line
(4)
on the rear wall.
Measure from FLOOR LEVEL to the
ENGAGEMENT EDGE where the
stability bracket will rest and add
2mm
(5)
.
Transfer this dimension to the rear
wall and secure the bracket to the
wall at this height
(6)
using the
two off centre holes in the single
bracket.
Installation Instructions
���
���������� ����
���
��������� ����
���� �� ������
���� ����
���
�����
�����������������
���
������ ���������� ���������
������ ��� ���� ���������
���
������ ����
���
������ ����
Содержание FSDF 60
Страница 1: ...Users Guide Installation Handbook Belling Freestanding Dual Fuel AU ...
Страница 34: ......
Страница 35: ......