Installing Your Cooker
Connecting the electricity supply - Terminal Block
type A
Warning: This appliance must be earthed!
Access to the mains terminal is gained by opening the
terminal block cover at the rear of the appliance - use
a flat bladed screw driver for this.
Connection between the consumer unit (45A
MCB/Fuse) and the cooker
control unit should be made with 10mm
2
cable.
Connection between the cooker control unit and the
appliance should be made with a 6.0mm
2
twin and
earth cable.
First strip the wires. Then push the cable through the
cable clamping the terminal block cover.
Connect the cable to the terminal block and tighten the
cable clamp screw - see diagram.
Close the terminal box, ensuring that the cover is
engaged on the locking tabs.
Equipment you will need:
Flat bladed screw driver
1
2
3
4
5
Cable
clamp
Earth
(Green / Yellow
or sleeving)
Live
(Red or Brown)
Neutral
(Black or Blue)
Live , Neutral , Earth .
Links to be fitted as shown. Ensure
terminal screw heads, , and
are fully tightened.
1
2
3
4
5