Belling CH302TX, Руководство пользователя

Страница: 13 / 24

13
Note:
• The red dot shows next to the relevant power level indicator to indicate which zone is being
controlled by the timer.
• If you want to change the time after the timer is set, you have to start from step 1.
• If you need to programme more than one cooking zone, then repeat the steps above.
Setting the timer to turn more than one cooking zone off
automatically
• If more than one heating zones are currently controlled by the timer, the timer displays the time
remaining for the zone which is due to finish first.
Note: The red dot next to power level indicator will flash.
(set to 5 minutes)
(set to 15 minutes)
• When the cooking duration time for the zone with the shortest cooking duration has elapsed, that
zone will switch off automatically. The power display for that zone will show ‘H’ to indicate that there
is still residual heat on the zone. Now the timer display will change to show the remaining cooking
duration time for the second zone and the red dot next to the power display for the second zone will
flash, as the timer display is showing the time remaining for that zone.
(Residual heat) (10 minutes remaining)
• When the cooking duration time for the second zone has elapsed, that zone will switch off
automatically. The power display for that zone will show ‘H’ to indicate that there is still residual heat
on the zone.
Note:
• A flashing red dot showing next to a zone’s power display indicates that the timer display is currently
showing the remaining cooking time for that zone.
• If you wish to change the cooking duration time, repeat the steps above.